Skip to content

Free U.S. shipping — no minimum. Same-day dispatch from LA (in stock, by 6 PM PT, Mon–Fri). Ships to Canada — $35 flat rate. 14-day returns. Apple Pay · Amazon Pay · Link · Cash App Pay (U.S.). Pay over time with Klarna. Visa · Mastercard · Amex · Discover · Crypto. Fit help from real people.

4 min read · Updated

G-SHOCK Not Working? Fix the Time, Hands and Display

Short answer

Most G-SHOCK problems are settings, not faults. A watch that is one hour off has the wrong daylight saving setting; several hours off means the wrong home city. Hands that disagree with the digital time need a home position adjustment. A dim or blank display means a low battery, or on solar models a watch that has gone to sleep in the dark.

The time is off by an hour, or by several hours

Casio's troubleshooting pages give the same two causes for every world-time model. Exactly one hour off: the daylight saving (DST, or summer time) setting is wrong for the season. Several hours off: the home city, and so the time zone, is wrong. Fix the city first, then DST, and only then the hour.

Models without time zones, such as the DW-5600 and DW-6900, have no DST switch: you change the hour yourself twice a year.

The hands don't match the digital time

On an analog-digital G-SHOCK the hands follow the digital time. Strong magnetism or a hard knock can leave them out of step. The cure is the hand home position adjustment in the watch's guide: you send the hands to 12 o'clock, correct them if they stop short, and the watch brings them back to the right time.

The button to hold differs by model: the upper-left button for five seconds on the GA-2100, GA-700, GA-V01 and Mudmaster, the lower-right button for three seconds on the GA-110 and GA-100. Use the setting guide for your model.

The display is dim or blank

On a battery model, Casio lists three signs of a low battery: a large timekeeping error, a dim display, or a blank one. Replace the battery soon, because running on a nearly dead one can cause a malfunction.

On a Tough Solar model a blank display is usually power saving. Left in the dark for about an hour at night, the watch switches its display off; pressing any button or moving it into the light wakes it. If it stays blank, it needs charging: leave it in bright light, face up.

It doesn't work after a battery change

A display that stays blank after a new battery usually means the module was not reset. Many Casio modules need a reset at a contact marked AC once the battery is in. That, and resealing the case, is why Casio advises leaving battery changes to a retailer or service center. Also check that the battery is the type named for the module and sits the right way up.

The buttons beep, or the time is in 24-hour format

Both are settings. The button tone is the KEY/MUTE setting near the end of the settings sequence on most analog-digital models. The 12/24-hour switch is in the same sequence, or on simple digital models one press of a button named in the watch's guide.

The watch gains or loses a few seconds

That is within specification. Casio rates most quartz G-SHOCK modules at ±15 seconds a month. Reset the seconds now and then, or choose a model with Multi-Band 6 or Bluetooth, which corrects itself.

Is there a way to reset a G-SHOCK?

There is no reset button on the outside, and you rarely need one. If you get lost in a settings screen, stop pressing: after two or three minutes without input the watch leaves the settings by itself. On most analog-digital models, holding the lower-left mode button for a couple of seconds returns to the time display.

When it is a real fault

Fog under the glass that does not clear, moisture inside, or a display that stays blank with a fresh battery are not settings. Stop using the watch and take it to a retailer or a Casio service center; Casio's U.S. warranty covers a new watch for one year.

FAQ

Why are the hands on my G-SHOCK not matching the time?

G-SHOCK hands fall out of step with the digital time after strong magnetism or an impact. The hand home position adjustment in the watch's guide brings them back.

Why is my G-SHOCK not working after a battery change?

A G-SHOCK that stays blank after a battery change usually needs its module reset at the contact marked AC, or has the wrong battery type. A service center can do both and check the seal.

How do I fix the time on my G-SHOCK?

To fix the time on a G-SHOCK, correct the home city first, then the daylight saving setting, then the hour and minutes, following the setting guide for your module.

How do I check the battery level on a G-SHOCK?

Solar G-SHOCKs show the charge level on the display or with a hand. Battery models have no gauge: a dim or blank display is the sign that the battery is low.

How do I hard reset a G-SHOCK?

A G-SHOCK has no external reset button. A full reset is done inside the watch at the contact marked AC, normally during a battery change at a service center.

Sources

  1. Casio: Operation Guide 5611, “Troubleshooting” and “Low Battery Power” (GA-2100)
  2. Casio: Operation Guide 5689, power saving (GA-B2100)
  3. Casio: Operation Guide 3230/3232, specifications (DW-6900)