Skip to content

Free U.S. shipping — no minimum. Same-day dispatch from LA (in stock, by 6 PM PT, Mon–Fri). Ships to Canada — $35 flat rate. 14-day returns. Apple Pay · Amazon Pay · Link · Cash App Pay (U.S.). Pay over time with Klarna. Visa · Mastercard · Amex · Discover · Crypto. Fit help from real people.

5 min read · Updated

How to Set the Time on a G-SHOCK GA-2100 (Module 5611)

Short answer

On a G-SHOCK GA-2100, hold the upper-left button (A) until SET stops flashing and a city code appears. Pick your city with the two right-hand buttons, press the lower-left button (C) to step through daylight saving time, 12/24-hour format, seconds, hour, minute, year, month and day, change each with the right-hand buttons, then press A to finish. The hands follow the digital time by themselves.

Which button is which on the GA-2100?

Casio's operation guide for module 5611 names the four buttons A to D. The GA-2100 and the metal-bezel GM-2100 both run this module, so the steps below are the same for both. The module number is engraved on the case back.

  • A, upper left: hold it to open the settings, press it to save and leave.
  • B, upper right: the light. While a setting flashes it moves the value down.
  • C, lower left: changes mode. While a setting flashes it moves to the next setting.
  • D, lower right: while a setting flashes it moves the value up.

Step 1: choose your home city

The GA-2100 keeps time by time zone, so the home city comes first. With the watch showing the normal time, hold A until the flashing SET disappears and a three-letter city code appears. Scroll with D (forward) and B (back) until your city is shown, then press A to save, or press C to keep going to the other settings.

The hands swing out of the way while you are in the settings and return on their own. If the watch is left alone for two or three minutes with a setting flashing, it leaves the settings by itself.

  • Pacific time: LAX (Los Angeles) or YVR (Vancouver).
  • Mountain time: DEN (Denver) or YEA (Edmonton).
  • Central time: CHI (Chicago).
  • Eastern time: NYC (New York), also for Toronto and Montreal.
  • Atlantic time: YHZ (Halifax). Newfoundland: YYT (St. John's).
  • Alaska: ANC (Anchorage). Hawaii: HNL (Honolulu).

Step 2: set daylight saving time, the time and the date

From the city code screen, each press of C moves to the next setting in this order: home city, daylight saving time (DST), 12/24-hour format, seconds, hour, minute, year, month, day, button tone, light duration. Change the flashing setting with D and B, and press A whenever you are done.

  • DST: D or B switches between ON (summer time) and OFF (standard time).
  • 12/24-hour format: D or B switches between 12H and 24H. In 12-hour format a P marks the afternoon.
  • Seconds: press D to reset them to 00. If they were between 30 and 59, one minute is added.
  • Hour, minute, year, month and day: D goes up, B goes down. Hold either one to move fast.
  • The day of the week sets itself from the date.

Why is my GA-2100 an hour off, or several hours off?

One hour off almost always means the DST setting is wrong for the season: open the settings, press C once and switch DST. Several hours off means the home city is wrong: the watch is keeping perfect time for another time zone. Fix the city first, then the time.

The hands don't match the digital time

Casio says a strong magnet or a hard knock can put the hands out of step with the display. To line them up again, hold A for at least five seconds until SUB flashes. Use D and B to bring the small day-of-week hand to SU, press C so 0:00 flashes, then use D and B to bring the hour and minute hands to 12 o'clock. Press A to finish and check that the hands now agree with the display.

To read the display when the hands are covering it, press B and C together: the hands move aside. Press both again to bring them back.

How to turn off the beep on a GA-2100

There are two different sounds. The button tone is the beep on every press: hold A until the city code appears, press C nine times until KEY or MUTE is shown, switch it with D or B and press A. MUTE means the buttons are silent; alarms still sound.

The hourly time signal is the double beep on the hour: press C until you reach Alarm Mode, press D until SIG is shown, then press A to switch it between ON and off (shown as two dashes).

How to change how long the light stays on

Hold A until the city code appears and press C ten times. A flashing 1 means the light stays on for about 1.5 seconds, a 3 means about three seconds. Switch with D or B and press A. Casio's three-year battery estimate assumes one short light a day, so the longer setting uses the battery faster.

Does this work on a custom GA-2100?

Yes. A custom colorway changes how the watch looks, not the module inside, so a Bezelwright GA-2100 or GM-2100 sets exactly as described here. If a painted or metal case covers the markings, go by position: settings at the upper left, mode at the lower left, light at the upper right.

FAQ

How do I change the time on a GA-2100?

On the GA-2100, hold the upper-left button until SET stops flashing and a city code appears, press the lower-left button to move to the hour and minute, change them with the right-hand buttons and press the upper-left button to save.

How do I change a GA-2100 from 24-hour to 12-hour time?

On the GA-2100, hold the upper-left button until the city code appears, press the lower-left button twice to reach the 12H/24H setting, switch it with either right-hand button and press the upper-left button to save.

Do I have to set the hands separately on a GA-2100?

No. The hands of a GA-2100 follow the digital time automatically. Only if they disagree with the display after a knock or a strong magnet do they need the hand adjustment described above.

How long does a GA-2100 battery last?

Casio rates the GA-2100 at about three years on two SR726W batteries, assuming one 1.5-second light and ten seconds of alarm a day.

Sources

  1. Casio: Operation Guide 5611 (GA-2100, GM-2100)