3 min read · Updated
How to Set the Time on a G-SHOCK DW-6900 or DW-9052
Short answer
On a G-SHOCK DW-6900 with module 3230, or a DW-9052, press the upper-left button (A) once: the seconds flash. Press the lower-left button (C) to move through hour, minutes, year, month and day, and raise each one with the lower-right button (E). Press A again to finish. These watches have no time zones, so for daylight saving time you change the hour yourself.
Set the time and date
Start from the normal time display. If the watch shows the alarm, timer or stopwatch, press C until the time is back.
- Press A. The seconds flash.
- Press E to reset the seconds to 00. From 30 to 59 seconds, this also adds one minute.
- Press C to move on. The order is seconds, hour, minutes, year, month, day.
- Press E to raise the flashing number; hold it to go fast. There is no button to go back down, so keep pressing until the number comes around again.
- Press A to finish. The day of the week sets itself from the date.
Switch between 12-hour and 24-hour time
While any digits are flashing, press D, the front button. In 12-hour format a P marks the afternoon and evening hours, so check it when you set the hour.
Daylight saving time
There is no DST setting on these modules. In spring, open the settings and raise the hour by one. In the fall, raise it by 23, which brings it back one hour, or switch to 24-hour format first so the hour is easier to follow.
The light and the flash
Press D in any mode to light the display. Holding E for about two seconds in the time display switches the backlight flash on or off: when it is on, the light flashes with the alarm, the timer and the hourly signal.
A faint sound when the light is on is normal on module 3230. Casio explains that it comes from the electro-luminescent panel, not from a fault.
Battery
Module 3230 runs on one CR2016 lithium battery, which Casio rates at about two years. Casio rates accuracy at ±15 seconds a month, so a small drift is normal.
FAQ
How do I set the time on a DW-6900?
On a DW-6900 with module 3230, press the upper-left button so the seconds flash, press the lower-left button to move to the hour and minutes, raise them with the lower-right button and press the upper-left button to save.
How do I set the time on a DW-9052?
The DW-9052 sets like the DW-6900: press the upper-left button, move through the settings with the lower-left button, raise each value with the lower-right button and press the upper-left button to finish.
How do I change a DW-6900 to 24-hour time?
On a DW-6900, press the upper-left button to start setting, then press the front light button to switch between 12-hour and 24-hour time.