4 min read · Updated
How to Set the Time on a G-SHOCK GA-110 or GA-100
Short answer
On a G-SHOCK GA-110 or GA-100, hold the upper-left button (A) for about three seconds until the city code flashes. Choose your city with the two right-hand buttons, press the lower-left button (C) to step through daylight saving time, 12/24-hour format, seconds, hour, minutes, year, month and day, change each with the right-hand buttons, and press A to finish.
Step 1: choose your city
With the normal time showing, hold A for about three seconds until the city code flashes. Press D or B until your city is shown. Casio stresses choosing the city before changing anything else: world time is worked out from it.
- Pacific time: LAX. Mountain time: DEN. Central time: CHI. Eastern time: NYC.
- Alaska: ANC. Hawaii: HNL.
Step 2: set daylight saving time, the time and the date
Each press of C moves to the next setting in this order: city code, daylight saving time (DST), 12/24-hour format, seconds, hour, minutes, year, month, day, light duration. Press A when you are done; the day of the week sets itself from the date.
- DST: press D to switch it on or off.
- 12/24-hour format: press D to switch.
- Seconds: press D to reset them to 00.
- Hour, minutes, year, month and day: D goes up, B goes down.
- Light duration: press D to switch between 1.5 seconds (LT1) and three seconds (LT3).
The hands show a different time from the display
The hands of these watches follow the digital time automatically. If they disagree after a knock or a strong magnet, the hand home positions need correcting.
Hold D for about three seconds until Sub appears in the lower display. Check the small speed hand first: it should point at 50, which is 12 o'clock on the GA-100 and 9 o'clock on the GA-110. If it does not, press D to move it there, then press C. Now bring the hour and minute hands to 12 o'clock with D (clockwise) and B (counterclockwise), and press A to return to the time.
Why is my GA-110 an hour off?
One hour off means the daylight saving setting is wrong for the season: open the settings, press C once and press D. Several hours off means the city code is for another time zone.
Battery
Both watches run on one CR1220 lithium battery, which Casio rates at about two years with one short light and ten seconds of alarm a day. That is short for a G-SHOCK, so a dim or blank display on an older GA-110 usually just means it is time for a new battery.
FAQ
How do I set the time on a GA-110?
On the GA-110, hold the upper-left button for about three seconds until the city code flashes, press the lower-left button to move to the hour and minutes, change them with the right-hand buttons and press the upper-left button to save.
How do I set the time on a GA-100?
On the GA-100, hold the upper-left button for about three seconds until the city code flashes, press the lower-left button to move through the settings, change each with the right-hand buttons and press the upper-left button to save.
What battery does a GA-110 or GA-100 use?
The GA-110 and GA-100 each use one CR1220 lithium battery, rated by Casio at about two years.