5 min read · Updated
How to Set the Time on a G-SHOCK GW-6900 (Module 3179)
Short answer
A G-SHOCK GW-6900 sets itself from the U.S. time signal once its home city is correct. Hold the upper-left button (A) until the city code flashes, choose your city with the right-hand buttons and press A. To check the signal now, hold the lower-right button (D) for about two seconds until RCVD flashes and leave the watch by a window for two to seven minutes.
Step 1: set your home city (usually all it needs)
With the normal time showing, hold A until the city code flashes. Press D or B until your city is shown, then press A. Casio says the watch should show the right time as soon as the city is chosen; if it does not, it corrects itself at the next automatic signal check during the night.
- Pacific time: LAX (Los Angeles) or YVR (Vancouver).
- Mountain time: DEN (Denver) or YEA (Edmonton).
- Central time: CHI (Chicago).
- Eastern time: NYC (New York).
- Atlantic time: YHZ (Halifax). Newfoundland: YYT (St. John's).
- Alaska (ANC) and Hawaii (HNL): automatic signal checks are off by default, because both are far from the transmitter.
Step 2: let it pick up the time signal
In North America the GW-6900 listens for the time signal sent from Fort Collins, Colorado. It checks by itself up to six times a day, during the night, and stops as soon as one check succeeds. For the best chance, take the watch off at night and leave it near a window with its 12 o'clock side pointing at the glass, away from metal objects, TVs, computers and phones.
To check now, hold D for about two seconds until RCVD flashes. A check takes two to seven minutes; do not press anything or move the watch meanwhile. GET on the display means it worked. Reception is usually better at night, and it can fail inside large buildings, in vehicles, near power lines or behind mountains.
Step 3: set the time by hand (when there is no signal)
Hold A until the city code flashes. Each press of C then moves to the next setting in this order: city code, daylight saving time, 12/24-hour format, seconds, hour, minutes, year, month, day, button tone, light duration, power saving. Change the flashing setting with D and B, and press A when you are done.
- Daylight saving time: D steps through Auto, ON and OFF. Leave it on Auto in the U.S. and Canada and the signal handles the change.
- Seconds: press D to reset them to 00.
- Hour, minutes, year, month and day: D goes up, B goes down.
The display is blank
A blank GW-6900 is usually asleep, not broken. Its power saving function switches the display off in the dark to save the solar battery; bring it into the light and it wakes. If the battery level is low, leave the watch face-up in bright light. Casio advises wearing it outside your sleeve as much as possible for the same reason.
Does this work on a custom GW-6900?
Yes for the buttons and settings: a custom colorway keeps the module. One caution: Casio says to keep metal objects away from the watch during a signal check, so a GW-6900 fitted with a metal bezel may need a better spot by the window. It keeps quartz time either way and can always be set by hand.
FAQ
Does the GW-6900 set itself?
Yes. The GW-6900 has Multi-Band 6 radio timekeeping: once its home city is set, it corrects its own time from the Fort Collins, Colorado signal, usually during the night.
How do I force a GW-6900 to sync?
On the GW-6900, with the normal time showing, hold the lower-right button for about two seconds until RCVD flashes, then leave the watch still near a window for two to seven minutes.
Why is my GW-6900 one hour off?
A GW-6900 that is one hour off usually has the wrong home city or daylight saving setting. Set the city for your time zone and leave daylight saving on Auto.