4 min read · Updated
How to Set the Time on a G-SHOCK DW-5600 (Module 3229)
Short answer
On a G-SHOCK DW-5600, press the upper-left button (A) so the seconds flash. Press the lower-left button (C) to move through hour, minutes, year, month and day, press the upper-right button (B) to raise the flashing number, and press A to finish. Pressing the lower-right button (D) while a number flashes switches between 12 and 24-hour time.
Set the time and date, step by step
Start with the watch showing the normal time. The settings come in a fixed loop: seconds, hour, minutes, year, month, day, then back to seconds.
- Press A. The seconds flash.
- To match a reference clock, press B on the exact minute to reset the seconds to 00. If they were between 30 and 59, one minute is added.
- Press C to move to the hour, then press B to raise it. Hold B to move fast.
- Press C again for the minutes, and again for the year, month and day, raising each with B.
- Press A to finish. The day of the week sets itself from the date.
12-hour or 24-hour time
While any number is flashing, press D to switch between 12-hour and 24-hour time. In 12-hour time, check the PM indicator when you set the hour: an alarm set for the wrong half of the day is the most common DW-5600 mistake.
Daylight saving time on a DW-5600
The DW-5600 has no time zones and no daylight saving setting, so the hour is changed by hand twice a year. In spring, raise the hour by one. In fall, hold B until the hour comes around to one less. The minutes and seconds are not disturbed when only the hour is changed.
Hourly beep, alarm and the flashing light
Press C once to reach Alarm Mode, then press B to step through the choices for the alarm and the hourly time signal until the indicators you want are shown. Back in the normal time display, holding B for about two seconds switches Flash Alert on or off: with it on, the backlight flashes along with alarms and the hourly signal.
Does this work on a custom DW-5600 or a newer one?
A custom finish or a moissanite bezel does not change the module, so the steps are the same. Casio also sells newer DW-5600 versions with an LED light on a different module; check the four-digit number on the case back. If it is 3229, 3421 or 3489, this guide applies as written.
FAQ
How do I change the time on a DW-5600?
On the DW-5600, press the upper-left button so the seconds flash, press the lower-left button to move to the hour or minutes, raise the number with the upper-right button and press the upper-left button again to save.
Which button is the light on a DW-5600?
On the DW-5600E (module 3229) the light is the lower-right button. It stays on for about two seconds after you let go.
How long does a DW-5600 battery last?
Casio rates the DW-5600E at about two years on one CR2016 battery, assuming 3.5 seconds of light and 20 seconds of alarm a day.