5 min read · Updated
How to Tell Moissanite from Diamond: Tests That Work
Short answer
The surest way to tell moissanite from diamond is a jeweler's loupe: moissanite is doubly refractive, so the facet edges on the far side of the stone look doubled, and diamond's never do. A basic thermal diamond tester does not work, because moissanite conducts heat so much like diamond that it reads as diamond. UV light and the fog test are not reliable either.
The loupe test: look for doubled facets
Diamond bends light one way. Moissanite splits each ray in two, which makes the back facet edges appear as pairs of lines. The Gemological Institute of America (GIA), which studied the first commercial moissanite in 1997, calls this the most readily identifiable property of the stone.
There is a catch. Moissanite is cut so that straight down through the top the doubling disappears. Tilt the stone and look in at an angle through the sloping upper facets, with a 10× loupe, and the doubling shows.
Why a diamond tester says “diamond”
The pen-style testers jewelers have used for decades measure how fast a stone carries heat away. That separates diamond from cubic zirconia and glass. It does not separate it from moissanite: in GIA's tests every moissanite registered as diamond on every thermal instrument tried. A moissanite tester, or a combined tester, takes a second measurement and catches it. So a stone that passes a basic diamond tester is either diamond or moissanite, no more.
What a jeweler sees under magnification
GIA found several signs that back up the doubling.
- Fine white needles lying parallel to each other inside the stone.
- Facet edges that are slightly rounded where a diamond's are knife sharp.
- Polishing lines running the same way on neighboring facets. A diamond has to be polished in a different direction on each.
Weight: moissanite is lighter
Moissanite's specific gravity is 3.22 and diamond's is 3.52, so a moissanite weighs less than a diamond of exactly the same size. A round diamond 6.5 mm across weighs about 1.00 carat; a moissanite cut to the same size weighs about 0.9 carat. This only helps with a loose stone and a precise scale.
UV light, the fog test and other home tests
Under long-wave ultraviolet light, most of the moissanites GIA examined did nothing and a few glowed weak orange. Many diamonds glow blue, and many do not glow at all. So a blue glow points toward diamond, but no glow tells you nothing.
The fog test, breathing on the stone to see how fast the mist clears, rests on the same heat conduction as the thermal tester, so it cannot tell moissanite from diamond for the same reason. Scratch tests prove nothing either, and can damage a setting: at 9.25 on the Mohs scale, moissanite scratches everything a household test would try.
By eye: the fire
Moissanite's dispersion is 0.104 against diamond's 0.044, so in sunlight or under spotlights it throws more rainbow-colored flashes. On large stones a practiced eye sees it. On the small stones of a pavé watch bezel it is very hard to see.
Telling moissanite from cubic zirconia
Here the thermal tester does work: cubic zirconia fails it and moissanite passes. Cubic zirconia is also singly refractive, so it never shows doubled facets, and it is far heavier, with a specific gravity of 5.56 to 6.00.
What this means when you buy
Honest sellers name the stone. Bezelwright's bezels are sold as moissanite and described as moissanite, never as diamond. If a listing anywhere says “diamond” at a moissanite price, ask for the stone to be named in writing.
FAQ
How can you tell if moissanite is real?
Real moissanite passes a thermal diamond tester and shows doubled facet edges through a loupe when viewed at an angle. Cubic zirconia does neither.
Does moissanite pass a diamond tester?
Moissanite passes basic thermal diamond testers: in GIA's study every moissanite registered as diamond. Testers built to detect moissanite identify it.
Does moissanite glow under UV light?
Most moissanite does not glow under UV light, and a few stones glow weak orange, according to GIA. Many diamonds glow blue, but many do not glow at all.
Can you tell moissanite from diamond with the naked eye?
Sometimes. Moissanite shows more rainbow-colored fire than diamond in strong light, which is visible on larger stones and very hard to see on small ones.
Does the fog test work for moissanite?
The fog test does not separate moissanite from diamond, because both carry heat away almost equally fast. It only separates either one from glass or cubic zirconia.