4 min read · Updated
How to Set the Time on a G-SHOCK GA-700 (Module 5522)
Short answer
On a G-SHOCK GA-700, hold the upper-left button (A) until SET Hold stops flashing and a city code flashes. Pick your city with the two right-hand buttons, press the lower-left button (C) to step through daylight saving time, 12/24-hour format, seconds, hour, minute, year, month and day, change each with the right-hand buttons, then press A to finish. The hands follow the digital time by themselves.
Step 1: choose your home city
With the watch showing the normal time, hold A until the flashing SET Hold disappears and a three-letter city code flashes. Scroll with D (forward) and B (back) until your city is shown; holding either one scrolls fast. Press A to save, or press C to go on to the other settings.
- Pacific time: LAX (Los Angeles). Mountain time: DEN (Denver).
- Central time: CHI (Chicago). Eastern time: NYC (New York).
- Alaska: ANC (Anchorage). Hawaii: HNL (Honolulu).
Step 2: set daylight saving time, the time and the date
From the city code, each press of C moves to the next setting in this order: home city, daylight saving time (DST), 12/24-hour format, seconds, hour, minute, year, month, day, button tone, light duration. Change the flashing setting and press A when you are done.
- DST: switch between ON (summer time) and OFF (standard time) with D or B.
- 12/24-hour format: press D to switch between 12H and 24H.
- Seconds: press D to reset them to 00.
- Hour, minute, year, month and day: D goes up, B goes down.
The hands don't match the digital time
After a hard knock or a strong magnet the hands can fall out of step. Hold A for about five seconds until 0:00 flashes, use D and B to bring the hour and minute hands to 12 o'clock, and press A. Then check that the hands agree with the display.
To read the display when the hands cover it, hold L and press C: the hands move aside. Do the same again to bring them back.
Light, beep and battery
Press L for the light. To choose how long it stays on, open the settings and press C ten times: 1 means about 1.5 seconds, 3 means about three. To silence the button beep, open the settings, press C nine times and switch between KEY (on) and MUTE (off).
Casio rates the GA-700 at about five years on one CR2016 battery, assuming one short light and ten seconds of alarm a day.
Does this work on a custom GA-700?
Yes. A custom colorway does not change the module, so a Bezelwright GA-700 sets exactly as described here.
FAQ
How do I change the time on a GA-700?
On the GA-700, hold the upper-left button until SET Hold stops flashing and a city code flashes, press the lower-left button to move to the hour and minute, change them with the right-hand buttons and press the upper-left button to save.
Why is my GA-700 one hour off?
A GA-700 that is one hour off has the wrong daylight saving setting. Open the settings, press the lower-left button once and switch DST.
What battery does the GA-700 use?
The GA-700 uses one CR2016 lithium battery, which Casio rates at about five years.