4 min read · Updated
G-SHOCK Band Replacement: Straps, Adapters & NATO Bands
Short answer
A G-SHOCK band is held to the case by two spring bars and is molded to fit one case shape, so a replacement band is chosen by model number, not by width. To wear a NATO, cloth or other standard strap you add strap adapters, which give the watch ordinary lugs. Casio's own cloth-band models take a 20 mm strap.
Are G-SHOCK bands interchangeable?
Only within families. The band meets the case along a shaped shoulder, and each series has its own. G-Central, which has taken these apart, says plainly that GA-2100 and DW-5600 bands are different and that parts should not be swapped between the two series.
Inside a family there is more freedom. The GA-2100, GA-B2100 and GM-2100 share their band attachment, so a strap adapter made for one fits the others.
How do you change a G-SHOCK band?
Each half of the band is held by a spring bar: a thin, spring-loaded pin that sits in two holes in the case. Changing the band does not open the watch, so it does not affect water resistance.
- Lay the watch face down on a soft cloth.
- With a spring bar tool, push one end of the bar in toward the band and ease that side of the band out of the case. A tool with a fine V-shaped tip works best.
- Lift the band away and keep the spring bar: bars are sized to the watch.
- Seat one end of the new band's bar in its hole, compress the other end, and slide it in until it clicks. Tug the band to make sure both ends are seated.
Strap adapters: fitting a NATO or cloth strap
A NATO strap needs a bar to pass under, and a G-SHOCK's band slot is not shaped for one. Strap adapters solve that: two small pieces that fit where the band was and give the watch ordinary lugs.
Casio makes its own. G-SHOCKs sold with a cloth band include resin adapters reinforced with stainless steel, and the cloth band on them is 20 mm wide. On the GA-2100, GA-B2100 and GM-2100 versions the adapters release with a small lever; on recent DW-5600 cloth-band models they come off with a spring bar tool. Aftermarket adapters are widely sold too, some sized for 22 mm straps.
Which models take the same strap adapters?
According to G-Central, strap adapters from a GA-2100 should also fit the GA-2110, GA-B2100, GBM-2100, GM-2100, GM-5600, GM-6900, DW-5610 and DWE-5600. A strap that brings its own spring bars may not fit Casio's adapters; keep the bars that came with them.
Where do you get an original G-SHOCK band?
Order by the full model number on the case back, such as GA-2100-1A1, because the color and finish of the band are part of the reference. In the U.S., original Casio bands, adapters and spring bars are sold through Casio's authorized parts supplier. Aftermarket bands cost less and come in more colors, but fit varies from maker to maker.
Bands on a custom G-SHOCK
A custom colorway keeps Casio's band attachment, so the same bands and adapters fit. A build with a metal case and bracelet is different: its bracelet is made for that case, and is sized by removing links, not by changing the band.
FAQ
Can you replace a G-SHOCK band?
Yes. A G-SHOCK band is held by two spring bars and comes off with a spring bar tool. Buy the replacement for your exact model, because bands are shaped to the case.
What size is a G-SHOCK band?
G-SHOCK bands are molded to the case, so they are sold by model, not by width. With strap adapters, Casio's cloth-band G-SHOCKs take a 20 mm strap.
Can you put a NATO strap on a G-SHOCK?
Yes, with strap adapters. They replace the stock band and give the G-SHOCK ordinary lugs that a NATO strap passes under.
Does a GM-2100 strap fit a GA-2100?
The GM-2100 and GA-2100 share the same band attachment, so strap adapters made for one fit the other, according to G-Central.
Does changing the band affect water resistance?
No. Changing a G-SHOCK band does not open the case, so the water resistance is unchanged.
What are G-SHOCK bands made of?
Most G-SHOCK bands are resin, a tough molded plastic. Some models come with a stainless steel bracelet or a cloth band on strap adapters.